Q2HB110M 2-phase stepper motor driver
Model No.︰Q2HB110M
Brand Name︰JB
Country of Origin︰China
Unit Price︰-
Minimum Order︰1 pc
Product Description
Q2HB110M is a constant angle and constant torque stepper drive. The driven voltage range from AC60V to AC110V. it can match 2-phase hybrid stepper motors whose rated current is under 8A and shaft diameter range from 86mm to 130mm. It is widely used in numerical device such as curving machine, middle-sized numerical machine and packing machine.
Features
* High performance, low price
* Two group 32 channels constant angel and constant torque subdivision. Highest subdivision: 200
* The motor phase current is reduced to set current value 100 ms after receiving the last pulse edge
* Bipolar constant current chopping circuit
* Optp-isolated input/output
* Driven current is adjustable continuously from 0.5A/phase to 8A/phase
* Single power supply, voltage arrange from AC60V to AC110V
* Highest response frequency: 200Kpps
* Overvoltage, overheat and overcurrent protection
Current setting
1. STOP/Im is the rotary switch that can set output current of holding motor status as 20%-80% of normal output current (increase in CW, decrease in CCW).
1. RUN/Im is the rotary switch for adjustment of the motor current.
|
R-1
|
0
|
1
|
2
|
3
|
4
|
5
|
6
|
7
|
8
|
9
|
A
|
B
|
C
|
D
|
E
|
F
|
|
Im(A)
|
0.5
|
1.0
|
1.5
|
2.0
|
2.5
|
3.0
|
3.5
|
4.0
|
4.5
|
5.0
|
5.5
|
6.0
|
6.5
|
7.0
|
7.5
|
8.0
|
Subdivision setting
Q2HB110M drive has two groups of subdivision, each group has 16 channels set by 16 switches (SK).
|
SK1
|
F
|
E
|
D
|
C
|
B
|
A
|
9
|
8
|
7
|
6
|
5
|
4
|
3
|
2
|
1
|
0
|
|
Step per revolution
|
1
|
2
|
4
|
5
|
8
|
10
|
16
|
20
|
25
|
32
|
40
|
50
|
64
|
80
|
100
|
200
|
|
SK2
|
F
|
E
|
D
|
C
|
B
|
A
|
9
|
8
|
7
|
6
|
5
|
4
|
3
|
2
|
1
|
0
|
|
Step per revolution
|
1
|
2
|
4
|
5
|
8
|
10
|
16
|
20
|
25
|
32
|
40
|
50
|
64
|
80
|
100
|
200
|
Choose subdivision by SK1 when SM is low voltage and SK2 when high voltage.
Parameter switch function
|
DP1
|
OFF, double pulse: PU is positive pulse signal, DR is negative pulse signal
|
|
ON, single pulse: PU is pulse signal, DR is direction signal
|
Wiring example
Input signal oscillogram
Caution
1. Supply voltage shouldn’t exceed 110V.
2. Input control signal is 5V, current-limit resistance should be connected when over 5V.
3. O.H is overheat indicator. It lights and the drive shuts off if the drive temperature is over 70℃. It doesn’t work until the temperature falls to 50℃. The heat sink is needed when overheat occurs.
4. POWER is indicator of power supply. It lights when the driver is power on.
Terminal function
|
Mark
|
Function
|
Specification
|
|
MF+
|
Positive of opto-isolated
|
Connected to +5V power supply. Driven voltage range from +5V to +24V. Current-limiting resistance is needed when over 5V.
|
|
MF-
|
Motor free signal
|
The motor current will be cut off and the drive stops working when it effects (low voltage).
|
|
SM+
|
Positive of opto-isolated
|
Connected to +5V power supply. Driven voltage range from +5V to +24V. Current-limiting resistance is needed when over 5V.
|
|
SM-
|
Subdivision choosing signal
|
Choose subdivision by SK1 when low voltage and SK2 when high voltage. Input resistance is 430Ω.
|
|
DR+
|
Positive of opto-isolated
|
Connected to +5V power supply. Driven voltage range from +5V to +24V. Current-limiting resistance is needed when over 5V.
|
|
DR-
|
DP1=ON, DR is direction signal
|
Change the motor’s direction of rotation. Input resistance: 220Ω. Low voltage: 0-0.5V, high voltage: 4-5V, pulse width>2.5μS
|
|
DP1=OFF, DR is negative pulse signal
|
||
|
PU+
|
Positive of opto-isolated
|
Connected to +5V power supply. Driven voltage range from +5V to +24V. Current-limiting resistance is needed when over 5V.
|
|
PU-
|
DP1=ON, PU is pulse signal
|
With the falling edge of the signal PU, the motor executes an angular step. The Input resistance is 220Ω. Low voltage: 0-0.5V, high voltage: 4-5V, pulse width>2.5μS.
|
|
DP1=OFF, PU is positive pulse signal
|
||
|
FL+
|
Positive of opto-isolated overheat / low voltage protection
|
The motor current is cut off automatically and signal FL- is active (low voltage ) when the temperature of the drive is over 70℃. The drive starts to work and the FL- is cleared when the temperature falls to 50℃.
|
|
FL-
|
Negative of opto-isolated overheat/ low voltage protection
|
Connect FL+ to current-limit resistance of output signal and FL- to ground. The maximum driven current is 50mA, the highest voltage is 50V.
|
|
TM+
|
Positive of opto-isolated origin output signal
|
When the motor current is on, the motor is at the origin position. (B, -A is on current); opto-isolated outputs (high voltage).
|
|
TM-
|
Negative of opto-isolated origin output signal
|
Connect TM+ to current-limit resistance of output signal and TM- to ground. The maximum driven current is 50mA, highest voltage is 50V.
|
|
AC~
|
Power supply
|
AC60~110V
|
|
+A、-A
|
Connection
|
 |
|
+B、-B
|
Payment Terms︰ Paypal,bank transfer,TT/LC/DP/DA